Protect and Enrich Your Oviedo Paver Hardscape
Hot, humid, rain-heavy weather is hard on paver hardscape in Oviedo. Mold and algae take hold on driveways, walkways, and pool decks year-round, and every heavy downpour carries a little more joint sand out from between the pavers. Once those joints run low, you get weeds pushing through, ants moving in, and pavers that start to shift underfoot.
We handle that with a full clean-and-seal, not a quick spray-down. Our crew cleans the pavers, refills the joints with fresh sand, and seals the surface to lock everything in and bring the color back to life. Prestige Cleaning has been protecting paver driveways and pool decks around Oviedo for years, and we treat each surface based on what it’s made of.
If your pavers are looking tired, faded, or overgrown, we’re ready to take a look. Call us at 407-990-1877 for a free estimate.
The Paver and Stone Types We Seal in Oviedo
We adapt the clean-and-seal to the surface in front of us, and natural stone gets handled differently from manufactured pavers.
Brick and Concrete Pavers
The standard manufactured paver surface you’ll find on most driveways, walkways, and pool decks in the area. These get the full treatment: we clean and pressure wash the surface, re-sand the joints with paver sand, then apply the flood-coat seal.
Travertine
A natural stone that usually needs no joint re-sanding. We clean it and seal it to protect the surface and bring out its natural tone. It’s a popular pool-deck choice on area homes because it stays cooler underfoot than a lot of alternatives.
Flagstone
Another natural stone, cleaned and sealed without joint sand where none is needed. Sealing protects the stone and deepens its natural color so it reads richer than it did before.
Marble
Natural stone that we handle with extra care. We clean it and seal it to guard against staining and everyday wear without harming the material.
Natural Stone
General natural-stone surfaces get cleaned and sealed as well, and they typically need no re-sanding. We match the approach to the stone so the seal protects without changing what makes it look good.
What Sets Our Paver Sealing Apart
Here’s what you’re getting when you hand us your paver hardscape.
Trained and Certified in Paver and Concrete Sealing
Our crew is trained and certified in paver and concrete sealing, so this isn’t a line item we tacked onto a pressure-washing menu. Correct surface prep, the right joint sand, and a properly applied flood coat are what make a seal actually hold up, and we’re trained to get each of those steps right.
We Re-Sand the Joints and Flood-Coat the Surface
The job is a full clean-and-seal. We clean and pressure wash the pavers with our Whisper Wash surface cleaners, refill the joints with paver sand, then put down two flood coats of a quality water-based polyurethane sealer. Re-sanding helps hold the pavers together and in place, while the flood coat protects the surface and enriches the color. A spray-and-go sealer skipped over that prep just doesn’t last.
Straight Talk About What Sealing Does and Doesn't Do
We clean, re-sand, and seal, but we don’t repair or re-level pavers, and we’ll tell you that before we start rather than overpromise. Sealing locks in the condition of the surface once it’s clean, so if your pavers have shifted or sunk, we’ll point you to a contractor for the leveling and seal the surface once that part is handled.
Get Your Oviedo Paver Sealing on the Calendar
How Our Paver Sealing Process Works
From your first call to the final invoice, here’s how the job runs.
01. The Free Estimate
Call, text, or send us a web form, and you’ll hear back fast. Calls are answered right away, and texts and web forms come back to you quickly. We quote in person, over the phone, or straight from photos and details you send, and the estimate covers scope, surface type, and what to expect. Residential quotes usually turn around within about 12 hours.
02. Approve, Schedule, and Confirm
Approve the quote and sign electronically, with no in-person signature needed. We set the appointment, send a confirmation and a 48-hour reminder, then an on-my-way text with a photo of the technician heading your way on service day.
03. Clean and Pressure Wash the Surface
The surface has to be clean first, because sealer won’t set over mold or algae. Our crew cleans and pressure washes the pavers with Whisper Wash surface cleaners to lift dirt, algae, and staining. Natural stone gets cleaned in the way that suits the material.
04. Re-Sand the Joints
On brick and concrete pavers, we refill the joints with paver sand to replace what rain and time have washed away. Natural stone usually needs no sand at this stage.
05. Flood-Coat Sealing
Once the surface is fully dry, we apply two flood coats of a water-based polyurethane sealer (Ure-Seal) to protect the pavers and enrich their color. This runs as a one to two day job, and if afternoon rain looks likely, we hold the sealing until the next morning so it goes down on a dry surface.
06. Cure, Walkthrough, and Invoice
The sealed surface needs time to cure, so plan to stay off it for 48 hours after we finish. We walk the completed job with you, and the invoice only follows once you’re happy with the result.
What Paver Sealing Costs
in Oviedo
Most paver sealing projects land inside a predictable range, with the final figure set by the size of the area, the surface, and its condition. Every quote is custom, and estimates are always free.
- Paver sealing starts at $1,000 and typically ranges from $1,000 to $2,000. That’s priced by square footage, surface type and condition, and access, and it covers the full clean, the joint re-sand, and the two-coat flood seal. Your custom quote reflects how big the driveway, walkway, or pool deck is and how much cleaning and re-sanding the surface needs.
- Ask about bundle savings when you get your estimate: 15% off when paver sealing is booked with two or more services on the same project, such as sealing the pool deck alongside a driveway clean.
- A 10% military and veteran discount is available as a promotion.
- No hidden fees. The price on your quote is the price you pay, with no credit-card processing surcharge.
What Customers Say
Frequently Asked Questions
How long does paver sealing take, and when can I use the surface again?
Paver sealing is a one to two day job, with the hands-on work running about 4 to 8 hours depending on the size and condition of the surface. Plan to stay off the sealed pavers for 48 hours afterward so the seal can fully cure. If afternoon rain threatens on the day we’re set to seal, we hold that step to the next morning so it goes down on a dry surface.
Do you repair or re-level pavers that have shifted or sunk?
No. We clean, re-sand the joints, and seal, but we don’t lift, repair, or re-level pavers. If your pavers have shifted or separated, we’ll point you to a contractor for the leveling and can seal the surface once that’s taken care of. Re-sanding the joints does help lock pavers together, but it isn’t a substitute for structural leveling.
Will sealing hide the stains already on my pavers?
Sealing locks in whatever condition the surface is in after we clean it, so it protects and enriches the color but won’t hide staining that has already soaked in. That’s exactly why we clean and pressure wash thoroughly before we seal. The better the surface cleans up, the better the sealed result looks.
Do I need to be home while you seal my pavers?
No, as long as we have access to the surface and a water source, you don’t need to be home. You’ll get an on-my-way text with a photo of your technician on service day, and we’ll walk the finished job with you or send documentation if you’re out. Just keep vehicles and furniture off the surface, and remember it needs 48 hours off after sealing.
Get Your Free Paver Sealing Quote in Oviedo Today
A free, custom estimate is a call away, with no obligation, and we can quote by phone, in person, or from photos you send. Plenty of area homeowners are protecting their paver driveways and pool decks before the next rainy stretch washes out more joint sand, and we’d be glad to help you do the same. Call us at 407-990-1877 to get started.
